The basic function of KefaRid is to prevent mould from starting to grow due to lack of moisture.
There are no chemicals involved in this process in sharp contrast to conventional anti-mould
paints whose function is to kill the mould by the use of fungicides, bactericides and other
chemicals. These chemicals become used up and exhausted after only a few years and loose their
killing capability.
The absorption/evaporation process of KefaRid is purely physical and hence KefaRid retains its
combating properties forever.
The manufacturer follows the development on the raw-materia
KefaRid stays clean
Due to the micro-pore matrix KefaRid is a good thermal insulator. The surface temperature is
consequently warmer than the substrate. A warm and dry surface does not attract dust, dirt and
other organic material and hence the second requirement for mould growth - nutrition - is
reduced.
KefaRid is effective against all organisms.
Not only mould, but algae, moss, lichen and bacteria need water to developed and KefaRid
therefore acts as a broad-spectrum remedy against organisms.
KefaRid is thoroughly tested and proved
KefaRid has been developed in cooperation with leading laboratories and universities in Sweden,
Denmark, Germany, USA and UK.
Laboratory tests are valuable and necessary for the product development and maintenance, but
real life situations are far too complicated to be duplicated in a laboratory.
Therefore KEFA is continuously running on-going, full-scale tests in different environments in
order to improve and develop products and methods.
At present KEFA is running projects in co-operation with IMALabs, Germany and Dansk
Teknologisk Institut, Denmark. These can be followed on Internet. If you are interested, please
contact us for an on line demonstration